Aero Wall Mounts For Plasma Displays

Basic Tilt: Enables wall mounting of any plasma display with up to 15o of tilt. A lock device secures the display in the bracket. Matt black powder coat finish.
V4: Articulating swivel mount extends the plasma display up to 30" from wall. Swivels and rotates in all directions, limited only by the wall. Display can be tilted up to 15o. Swivels at both the wall and the bracket support, so you can position the display flush against the wall when not in use.
W490 and W1150: Enables displays to be rotated +-20o. Column has built in cable management and concealed 2-socket electric panel. W290 is a 19" column and holds one plasma. W1150 is a 45" column and holds up to 2 displays and optional shelves. The plasma can be raised and lowered over a 26" range in 2" increments.
Aero Ceiling Mounts For Plasma Displays

C Basic Ceiling Mount: Quickly and safely install Draper's pipe style mount to the ceiling or above it. Attach a universal or display specific bracket to the back of the plasma and slide it keystone-shaped plate onto the CBasic's universal mounting bracket.
T4 Ceiling Mount: Install a plasma with the top of the image virtually flush with the ceiling line. Complete 360o rotation and up to 15o of tilt are standard. A separate "above the ceiling" mounting bracket is included for structural support with a suspended ceiling installation - or it may be exposed in rooms with higher ceilings. Upper bracket adjusts from 14 1/2" to 30 1/4" long. Matte black powdercoat finish.
C490 Ceiling Mounts: C490 suspends a plasma display from a 20" long extruded aluminum column mounted to a heavy gauge steel ceiling bracket. Ceiling bracket swivels to permit a complete 360o horizontal rotation, and display can also be tilted up to 15o. Standard setting places screen approx. 48" from top of bracket.
C1150 Ceiling Mounts: Similar to C490, but offers a 45" long column. Standard setting places center of display approx. 72" from top of ceiling bracket.
CD490 and CD1150 are dual ceiling mounts and each hold 2 plasma displays back-to-back.

Aero Floor Stands For Plasma Displays

Mobile 1450: Offers instant portability of your plasma display with complete safety. A wide track tubular steel base with 4" swivel casters enable fast, easy movement from room to room. Display mounts onto a sturdy 63 1/2" high extruded aluminum column. Standard height settings places center of display image approx. 56" off the floor. Display can be raised and lowered over a 30" range in 2" increments. Column has built in cable management.
Mobile 2000: Identical of Mobile 1450, except it is taller. The extruded aluminum column is 85 1/8" high. Standard height setting places center of display approx. 78" off the floor. Display can be raised and lowered over a 58" range in 2" increments.
Aero Floor Stands For Plasma Displays

F1450 Floor Stand: Well balanced shape and weighted base ensure a stable and safe platform for even the largest plasma display. Base is 30 1/8" wide x 19 1/2" deep. Column has a 30" range of vertical adjustment. Excellent for trade shows, store fronts and lobbies. Display mounts onto a sturdy 57" extruded aluminum column. Total height is 59 1/4". Display can be mounted either horizontally or vertically with the correct plasma specific bracket. Optional adjustable column shelves to hold VCR, DVD and related equipment.
F2000: Same as above, except aluminum column is 78 3/4", and total height of stand is 80 7/8" with 58" of vertical adjustment.

Aero Table Stands For Plasma Displays

The Aero table stand allows for easy placement of a plasma display on a table or credenza for trade shows, office or boardrooms. Its modern design complements the sleek proportions of any plasma display. The Aero table stand's well balanced shape and weighted base ensure a stable and safe platform for even the largest plasma display. It stands 24 3/8" high, and the base is 25" wide x 14 1/4" deep.
Aero Mount for LCD Flat Panel Displays

FPD Wall Infinite Mount: Rotate, tilt or angle your display at will, while placing the back of your monitor only 5" from the wall.
FPD Wall AT Mount: The monitor can be angled or tilted. Back of your display is only 2 1/8" from the wall.
FPD Wall Mount: The bracket cannot be tilted or angled, but the display is on 5/8" from the wall.
FPD Ceiling Mount: Attractive, telescoping column of natural anodized aluminum for suspending LCD flat panel displays from the ceiling. Quickly and safely install mount to the ceiling or above it. Attach a FPD bracket to the back of the monitor and slide it onto the column's keystone-shaped plate. Available in 5 ranges of adjustability.